AeroLED2 is GEW's next generation UV LED curing system for the label and narrow web markets, offering increased power, dose and irradiance compared to the generation one model.

AeroLED2

AeroLED2 is GEW’s next generation, higher power, air-cooled UV LED curing system for label and narrow web applications up to 70cm wide, with a UV irradiance of up to 26W / cm2.

AeroLED2

AeroLED2 is a next generation, higher power UV LED system for full cure, printing, coating and converting applications up to 70cm wide; AeroLED2 offers a 30% increase in electrical power (70W / cm), a 30% increase in UV dose (170mJ / cm2) and a 40% increase in UV irradiance (26W / cm2) compared to its predecessor, AeroLED.

AeroLED2 is also ArcLED compatible. Using the same fan and ducting arrangement as the industry standard E2C, customers have total flexibility to switch between UV arc and AeroLED2 on any station. No filters are required due to the high redundancy, making maintenance a breeze. Moreover any customers with GEW’s RHINO/RLT power supply platform can upgrade to LED within a matter of hours, by simply changing the cassettes and running a software upgrade.

Following its predecessor, in an AeroLED2 system air is extracted by a single centralised fan sited away from the press. There is no need for integrated fans or electronics in the individual lampheads, which eliminates the high pitched noise and risk of failure that these bring. AeroLED2 features the same LED chassis and core components as GEW’s LeoLED2 lamphead, for proven reliability. As with LeoLED2, the lamphead has tough watertight seals to protect the LED modules from ingress and to make cleaning easy and safe. Every aspect of the design has been carefully considered to deliver robust performance and long-term reliability.

AeroLED2’s efficient optical design enables the lowest energy usage of all GEW products. This delivers energy savings of up to 55% when compared to a conventional UV arc system – you can find out your potential energy savings on our ROI calculator. In addition to offering greatly reduced operating costs, printers upgrading to AeroLED2 are able to free up >50% of mains capacity, which can then be used to install new machinery and subsequently increase production capability. Two AeroLED2 systems have a lower electrical supply requirement than just one conventional arc UV system.

A further advantage of LED is its predictability and stability of UV output in the curing process. AeroLED2 delivers improved in process control by ensuring stable UV output year after year, and eliminates the uncertainty of conventional UV lamps, reflectors and mechanisms to ensure consistent production quality. As is the case with all new GEW UV products, AeroLED2 uses GEW’s RHINO power supply and control range, for ultimate reliability with Industry 4.0 approved, IoT Remote Monitoring as standard.

Find out more below or download our brochure now:

AeroLED2 is GEW's next generation UV LED curing system for the label and narrow web markets, offering increased power, dose and irradiance compared to the generation one model.
AeroLED2 offers a 30% increase in electrical power, a 30% increase in UV dose and a 40% increase in UV irradiance compared to its predecessor, AeroLED.

Benefits of AeroLED2

  • Fully air-cooledSingle centralised fan system for quiet and reliable operation. No chiller required. Significantly reducing investment cost and power consumption. No heat exhausted onto press or into press room. Air can be ducted out.
  • Cut your energy costs by up to 55%, with ROIs on new machinery less than 1 year. No ozone, no mercury.
  • Most efficient curing Large window gives maximum light extraction. Longer dwell time increases dose. LEDs now closer to window, meaning increased irradiance.
  • Improved reliabilityAeroLED2 and LeoLED2 share the same core components, enabling high volume, industrialised manufacture and improved reliability. Embedded temperature sensors constantly monitor the LEDs to ensure safe, long-term operation and reliability.
  • Easy maintenanceTough watertight seals protect LEDs from ingress and make for easy cleaning. GEW’s standard cassette design for easy maintenance. No integrated fans or electronics in lamphead. Robust air-cooled heatsinks are easily accessible.
  • Longest LED warranty – AeroLED2 diodes have an expected lifetime of >30,000 hours. GEW offers up to 5 years optional warranty, irrespective of running hours.
  • Free up mains capacity with electrical requirements over 50% less than arc – two AeroLED2 systems use less mains capacity than one E2C system!

GEW LED at work


AeroLED2 specification

Max electrical power70W / cm
Wavelength395nm*
Irradiance at window26W / cm2
Typical dose @ 100m / min170mJ / cm2**
Maximum length70cm
Standard cross section110mm W x 190mm H
CoolingAir
Standard max
operating temperature
35oC (95oF)
Standard max humidityNon-condensing
Expected diode lifetime>30,000 hours

* 365nm, 385nm & 405nm available upon request.
** Measured with an EIT LEDMAP with L395 (370 – 422nm) responsivity.


Air-cooled LED case studies

GEW’s air-cooled UV LED systems are renowned for their reliability, power, print speeds and energy efficiency. Find our latest case studies below:


Patented Interchangeable Technology

ArcLED hybrid UV technology allows interchanging of a UV Arc lamp or LED array in the same housing. The video below illustrates the simplicity of this process.

Optimise your press with a mixture of Arc and LED curing on any station, for the ultimate flexibility.

GEW has held granted patents covering ArcLED technology internationally since 2016.


Upgrade to GEW UV LED, simply and quickly

For GEW RHINO and RLT users, UV curing systems can be upgraded to AeroLED2 with minimal downtime by simply replacing the cassettes and running a software upgrade. The video below illustrates how simple this process is.

The table below illustrates the components needed for an AeroLED2 retrofit based on the existing UV curing technology on your press.

Components
needed ↓
E2C &
RLT/
RHINO
E2C &
eBrick
Any
other
system
AeroLED2
lamphead
RHINO/RLT
& HMI
Fan &
Ducting
Shielding

Turnkey solutions

GEW deliver a complete integrated UV curing solution, including lampheads, cooling equipment, power supply and user control systems.


Speak directly to a sales representative

If you would like to find out more about this curing system, we are here to help. Please contact the sales representative that is best placed for your region.

Marcus Greenbrook GEW

Region, International:
Marcus Greenbrook
Director, International Sales

T: +44 7764 986 911

Email Marcus directly

Amir-Dekel, Vice President, Sales at GEW Inc.

Region, Americas:
Amir Dekel
Vice President, Sales

T: +1 440 673 5640

Email Amir directly

Jamie Neill GEW

Region, UK:
Jamie Neill
Sales Manager

T: +44 7793 042 467

Email Jamie directly